With our ped3D-FLX2 3D printer, it is easier than ever to produce insoles. By manufacturing using the uncomplicated FDM printing process, you can produce flexible insoles up to
size 48 in just 30 minutes per pair. Apart from the time advantage, there is no waste with 3D printing, as only as much material is used as is required for the insert. Reworking the finished
insert is also completely unnecessary thanks to this high-precision 3D printing. Above all, the ped3D-FLX2 saves you a lot of time and additional specialist staff.
Due to its compact design and the extremely quiet and clean printing technology, the ped3D-FLX2 can be operated almost anywhere. It is therefore suitable for almost every
For the best possible efficiency: Equipped with two independently controllable pressure plates (200 x 200 x 320mm working area), you can use both inserts with the ped3D-FLX2 of a
pair at the same time.
Compatible slicer programs:
Cura (freeware) oder simplify3D
With the ped3D-FLX2 you can 3D print both inlays and lasts. The various materials required for this have been extensively checked by us and subjected to countless stress
The high-quality metal frame of the ped3D-FLX2 gives the 3D printer the necessary stability for every printing process. In this way you always achieve optimal 3D printing
We would be happy to advise you to find out how the ped3D-FLX2 can support you in your company.
Insoles and lasts made from various high-quality materials. No waste and no reworking necessary.
Everything at a glance. All important information about the status of your current print job and printer settings are clearly displayed.
Video direkt auf YouTube anschauen: ped3D-FLX2
Contact & approach